Cantiere Del Pardo Grand Soleil 46.3', Руководство пользователя

Страница: 24 / 98

Paint-finish - Maintenance of surfaces
6.
2
Grand Soleil 46.3'
coat mixture on the area covering a slightly wider area, since gel
coat tends to shrink a little when curing.
• In order to obtain a smooth surface, cover the gel coat with a
plastic film and press down.
• When the catalyzing process is completed (follow the manufac-
turer’s recommendations for the working times) and the gel coat
has hardened, wet sand with 600-wet - and - dry grit paper until
smooth.
• Polish and wax to complete the repair.
Teak Deck (Opt)
• Rinse and clean the teak deck regularly with fresh water and a
brush with medium hard bristles (bristles which are too hard may
scratch the surface) and treat periodically with teak oil (at least
once a year).
Caution: is important to brush always following the direction of the
wood fibers.
Hull below Waterline
◊
The Cantiere del Pardo generally applies anti fouling bottom paint
(Opt).
• If the anti fouling paint peels off this could be due to silicon wax
residues on the hull when it was taken out of the mould.
- Clean the hull with a pressurized water jet. Never use sand
paper to clean the hull.
• To ensure the best performance from the yacht at all times, clean
the hull frequently with a pressurized water jet.
• Remember that anti fouling paints contain toxic chemical which
can harm eyes, skin and lungs. When working on the hull always
wear protective equipment and avoid direct body contact with the
paint and solvents.
Interiors
• In case of damage to the paints, call Cantiere del Pardo for
information.
• Keep the interior of the boat well ventilated and dry at all times.
• Avoid long time exposure of the varnish to direct sun rays by using
curtains or canvases