Cantiere Del Pardo Grand Soleil 46.3' Скачать руководство пользователя страница 80

Страница: 80 / 98

Waste water drainage from shower and sinks

25.

Grand Soleil 46.3'

Waste water drainage from shower and sinks

Shower waste water drainage installation

◊

The shower water-collecting basins, located below toilet grating,
are drained out by the electric bilge pumps fitted with filter on the
intake.

◊

The control switch to the pump is the

BILGE PUMPS

which is located

in the

PUMPS

section of the 12 V

Functions Panel (§ pages

.5 &

.6) whereas actual switches are in the front side of the sinks in the

heads.

◊

The two electric pumps for draining the showers are located as
follows (§ page

.6):

• For the fore head

under the central sit of the saloon, next to the fresh water pump.

• For the aft head

in the front part of the engine compartment.

• While showering or after, always drain water out of the basin by

activating electrical pump.

• Drainage of the pumps flows into drainage collector located in aft

port peak (§ page

.1).

Waste water drainage operations are as follows:

◊

Before entering the shower, select the shower bilge aspiration
valves as follows:

• For the shower in the fore head, on the collector C under the

central sit of the saloon open the valve (

4) and close the other two

(

2 and

3).

• For the shower in the aft head, on collector D in the left front part

of the engine compartment open valve (

2) and close the other two

(

3 and

4).

• Turn on the

BILGE PUMPS

switch which monitors electrical pump.

It is located in 12 Vdc Functions Panel. This switch monitors the
local switches located in the toilets.

• Leave on the above monitor switch for all the duration of the

shower and turn on the actual switches next to the shower until
waste water has been completely drained out.

Содержание Grand Soleil 46.3'



































































































Результаты поиска

Содержание Grand Soleil 46.3'

Отзывы:

Бренды по названию

Популярные бренды

Cantiere Del Pardo Grand Soleil 46.3', Руководство пользователя

Результаты поиска

Содержание Grand Soleil 46.3'

Отзывы:

Бренды по названию

Популярные бренды