Cantek 303S, Руководство по эксплуатации и запасным частям

Страница: 10 / 26

7
WOOD THICKNESS ADJUSTMENT
1. Firstly loosen the L Handle (a.), and then turn around the Handwheel (b.) to
make the pressing piece go up and down for meeting the thickness of
workpiece.
For example, the thickness of workpiece is 30mm. The number of scale
should be 27mm, and to press down 3mm for suppress the workpiece.
(Refer to the following figure 1 & 2)
a. L HANDLE for adjusting the handwheel
b. HANDWHEEL
(Turn the wheel clockwise: the wheel up;
Turn the wheel anticlockwise: the wheel down.)
Figure 1. Figure 2.