Cansonic ultradash S1, Инструкция по эксплуатации

Страница: 8 / 36

-Built-In Microphone & Speaker
Our Cameras have a built in microphone as well as speaker for you to be able
to use. The feature also works with the cameras playback feature.
Cansonic UltraDash S1 SUCTION MOUNT
We have specific goals when it comes to creating a product anyone can use.
Our Suction Mount lets any and all types of vehicles to carry your camera
around. Below are instructions for you to install the mount to your car with your
new Cansonic UltraDash S1.
1. Suction Release Tab
After you have placed the suction cup upon a clean surface, the locking lever
will be set and the mount will be in place. The suction release tab allows you to
release the cup from the window to readjust your camera.
2. Suction Cup
a standard suction cup to place the mount on the window surface. Remember
to clean the surface of the window and add a small amount of moisture on the
suction cup to allow for a stronger bond between the glass and the suction cup.
Do not place where there is paint.
3. Locking Lever
Our locking lever has been designed to go hand in hand with your vehicles
widescreen. This lets you have a full visual of what’s ahead the road. Look for
the lever and pull down, this will prepare the window mount for its use. Once
you have found the perfect location for the mount, firmly pressed down the
mount and lock the lever to place it securely. Remember to find a suitable
location where it won’t be a distraction for you.
4. Locking Ring
Loosen the locking ring so you are able to adjust the Cansonic UltraDash S1 to
the perfect angle. Remember to tighten the lock before you use it.
1
2
4
3
6