background image

Via Hub 

Configuration Manual

July 2017 • Rev. 1.1

Page

of

2

10

Table of Contents

Introduction

Cansec’s Via Universal Wireless Locks communicate wirelessly to a Via Hub which can be located 
up to 70/170 ft (21/52 m) away in a typical office environment. Each Hub can support two Via 
Locks.

Wiegand data is sent wirelessly to the Via Hub, which in turn sends the data to a Wiegand reader 
port on the associated access control panel for verification. If the lock relay operates, indicating that 
access is granted, the Hub will send a wireless unlock command to the reader at which the card was 
presented.

KEY FEATURES

•  Configure in less than 5 minutes

•  Works with ANY access control panel

•  Up to 70/170 ft (21/52 m) range (selectable via DIP switch)

•  Built-in self diagnostics

•  Via Universal Hub supports 2 locks

Introduction .......................................................................................................................................... 2

KEY FEATURES ..............................................................................................................................................  .2

Typical Configuration .......................................................................................................................... 3
Specifications ...................................................................................................................................... 3
Configure Via Hub ............................................................................................................................... 4

DIP SWITCHES ...............................................................................................................................................  .4

Via Hub Wiring ..................................................................................................................................... 9
Wiring SmartLock Pro Plus ...............................................................................................................10

© Copyright 2016 Cansec Systems Ltd.

Содержание Via Lock1











Отзывы: