Canon XF400, Инструкция по эксплуатации

Страница: 71 / 164

71
White Balance
White Balance
The white balance function helps you to produce accurate colors under different lighting conditions. This function
can only be used when the shooting mode is set to
’
,
‚
,
“
or
n
. It is not available when infrared recording
is activated.
You can also adjust the white balance remotely using Browser Remote on a connected network device (
A
123,
128).
1 S elect [ White Balance].
[FUNC]
>
[ White Balance]
2 Touch the de s ired option and then touch [
X
].
• If you selected [ Color Temperature], [ Set 1] or [ Set 2] and wish to change the color temperature
value or register a new custom white balance, continue with the appropriate procedure below instead of
touching [
X
].
• The icon of the selected option will appear at the left of the screen.
To s et the color temperature ([ Color Temperature])
3 Touch [
i
].
• An adjustment dial will appear on the screen.
4 Drag your finger along the dial to s et the color temperature value.
5 Touch [
X
].
To s et a cu s tom white balance ([ S et 1] or [ S et 2])
3 Touch [
i
].
4 Point the camcorder at a gray card or white object s o that it fill s the frame at the center of the s creen
and then touch [ S et WB].
• When the
Å
icon stops flashing, the procedure is completed. The setting is retained even if you turn of f the
camcorder.
5 Touch [
X
].
Options
Operating modes:
[
Ã
Automatic]: The camcorder automatically sets the white balance for natural looking colors.
[
¼
Daylight]:
To record outdoors on a bright day.
[
É
Tungsten]: To record under tungsten and tungsten-type (3-wavelength) fluorescent lighting.
[ Color Temperature]:
Allows you to set the color temperature between 2,000 K and 15,000 K.
[
Set 1], [ Se
t 2]:
Use the custom white balance settings to make white subjects appear white under colored
lighting.