![background image](http://html1.mh-extra.com/html/canon/wux7500/wux7500_user-manual_4218319228.webp)
Troubleshooting
228
■
You Cannot Project an Image Appropriately
■
The Projector Power Turns Off
The projector has been
moved to a place where
the temperature varies a
lot.
When the projector is moved from a location where
the temperature is low to a location where the
temperature is high, condensation may form on the
lens. The condensation will evaporate after a period
of time and the projector will be able to project a
normal image.
The lens is stained.
Clean the lens (
The tracking is bad.
Adjust the tracking with the [Auto PC] (
) or
[Tracking] (
) function.
Video is blurred.
Activate motion blur reduction (
Motion blur reduction is
not available.
Motion blur reduction is not available in projection
using USB flash drives or networked multi-projection.
The sharpness setting is
not available.
Sharpness cannot be adjusted during split-screen
display.
The lens unit is not
installed correctly.
Check whether the lens unit is installed correctly
(
The lens lever is not
engaged.
Check whether the lens unit is installed correctly
(
Cause
Countermeasure
The projected image is
inverted in the vertical or
horizontal direction.
The ceiling mounted / rear projection setting is
incorrect. Check the [Image flip H/V] setting in the
[Install settings] menu (
The dot clock of the input
signal is higher than 162
MHz.
Set the signal dot clock to 162 MHz or less on your
computer.
A computer cable is
used in which some pins
are not connected.
Use a computer cable in which all pins are
connected.
Cause
Countermeasure
The air intake or exhaust
vent is blocked.
Check whether the air intake or exhaust vent is
blocked. If the air intake or exhaust vent is blocked,
the temperature inside the projector will increase and
the power is automatically turned off to protect the
projector (The [WARNING] indicator and [TEMP]
indicator are lit.). Wait until the projector temperature
drops, then make sure that the intake and exhaust
vents are not blocked and turn on the projector (
).
Cause
Countermeasure
Содержание WUX7500
Страница 41: ...41 Basic Guide ...
Страница 60: ...60 Installation Guide Before setting up the projector be sure to read Before Installation P24 ...
Страница 116: ...116 Menu Guide ...
Страница 206: ...206 Maintenance Product Specifications Troubleshooting ...