![background image](http://html.mh-extra.com/html/canon/wux5800/wux5800_user-manual_62621035.webp)
35
Before Use
Be
fo
re
Us
e
■
Terminals and Connectors
(1) LAN / HDBaseT port (
)
Receives HDBaseT input including digital video and audio signals.
Carries both video and audio signals across a single LAN cable (shielded
twisted pair).
This port can also be used to connect the projector to a network.
Outputs the audio to external AV equipment. This outputs the audio signal that
corresponds to the projected image signal.
(3) AUDIO IN terminal (
)
Receives audio input. Audio supplied to this terminal is played through the
internal speaker when you set [Audio in terminal select] to [Audio in] (
).
(4) Terminal for wired remote control (
This terminal is used to connect the optional remote control (RS-RC05) using a
cable.
(5) DisplayPort port (
Receives DisplayPort input including digital video and audio signals.
Carries both video and audio signals across a single cable.
(6) HDMI terminal (
)
Receives HDMI input including digital video and audio signals.
Carries both video and audio signals across a single cable.
(7) DVI-I terminal (
Connects the external monitor output from a computer.
Receives digital PC signal (Digital PC).
A VGA-DVI-I cable can also be used to receive analog computer signals
(Analog PC-1).
(8) Analog PC-2 / COMPONENT terminal (
Receives the analog PC signal (Analog PC-2).
A component cable can be used to receive the component image signal
(Component).
(9) Service port (
Used to control the projector with user commands (
–
(10) USB port (
Connects a USB flash drive. Used for projection of images on a USB flash
drive, or for firmware updates.
(7)
(1)
(4)
(6)
(8)
(9)
(2)
(10)
(3)
(5)
Содержание WUX5800
Страница 41: ...41 Basic Guide ...
Страница 60: ...60 Installation Guide Before setting up the projector be sure to read Before Installation P24 ...
Страница 116: ...116 Menu Guide ...
Страница 206: ...206 Maintenance Product Specifications Troubleshooting ...