![background image](http://html.mh-extra.com/html/canon/wux5800/wux5800_user-manual_62621162.webp)
Menu Description
162
Power supply settings
> [System settings] >
[Power supply settings]
Specify how power is managed at startup, in standby, and when no signal is
supplied.
Standby power setting
Specify network function operating status in standby mode.
Option
Function
Normal
All network functions are available when network functions are
enabled, including the web screen and PJLink.
Low-power
All functions are disabled except for some wired LAN functions (such
as operations over a network).
Power management mode
Specify to turn the light source off or enter standby if there is no input signal. This feature
automatically turns off the light source or power after a certain period if the remote control or
projector is not operated.
Option
Function
Disabled
Disable power management mode.
Light source off
Only turns the light source off.
Standby
Turns the projector off and puts it in standby.
• [Standby power setting] is set to [Normal] and cannot be changed when scheduling
is enabled (
).
• [Standby power setting] is set to [Normal] and cannot be changed when wireless
LAN is enabled (
• [Standby power setting] is set to [Normal] and cannot be changed when IPsec
function is enabled (
• Projection resumes when the same input signal is restored, when the remote control
or projector is operated, or when user commands are sent to turn the projector on.
• After the projector enters standby, restoring projection requires the same steps as
when turning the projector on normally.
• When [Disabled] is selected, [Direct power on] is not available.
Содержание WUX5800
Страница 41: ...41 Basic Guide ...
Страница 60: ...60 Installation Guide Before setting up the projector be sure to read Before Installation P24 ...
Страница 116: ...116 Menu Guide ...
Страница 206: ...206 Maintenance Product Specifications Troubleshooting ...