Canon w-e1, Инструкция по эксплуатации

Страница: 82 / 98

82
Responding to Error Messages

Are any obstacles blocking the line of sight between the
camera and the connected device or the antenna of the
access point?
 Move the antenna of the access point to a position clearly visible
from the point of view of the camera (p.85).

Is the camera too far from the connected device or the
antenna of the access point?
 Bring the camera and the connected device or the antenna of the
access point closer together.

The wireless connection was lost for some reason, and the
connection cannot be restored.
 The following are possible reasons: excessive access to the
access point from other device, a microwave oven or similar
appliance in use nearby (interfering with IEEE 802.11b/g/n (2.4
GHz band)), or influence of rain or high humidity (p.85).

Are the camera and the access point set to use the same
encryption key for authentication?
 The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is set on the camera (p.47).

Are the camera and the access point set to use the same
encryption method?

The camera supports the following encryption methods: WEP,
TKIP, and AES (p.36).

If filtering by MAC address is active, is the MAC address of the
W-E1 used registered at the access point?

Register the MAC address of the W-E1 used at the access point.
The MAC address can be checked on the [
General sett. ] screen
(p.72).
65: Wireless LAN connection lost
66: Incorrect wireless LAN encryption key
67: Incorrect wireless LAN encryption method