Canon VIXIA GX10, Инструкция по эксплуатации

Страница: 106 / 155

Connecting to a Wi-Fi Networ k
106
Configuring the IP Address Settings
At this point you need to configure the TCP/IP settings. If necessary, consult the network administrator to obtain
the relevant information.
1 Touch [Automatic] or [Manual] to s elect the method for a ss igning the IP addre ss .
• If you selected [Automatic], the IP address will be assigned automatically. Continue with the procedure to
review and save the configuration (
A
106).
2 To enter the IP addre ss , touch the [
i
] button next to [IP Addre ss ].
• Touch [
Í
] or [
Î
] to set the value for the first field of the address and then touch the next field to select it.
After completing the four fields of the address, touch [OK].
3 Enter the re s t of the nece ss ary TCP/IP s etting s in the s ame way.
• Camera Access Point connections: Enter the [Subnet Mask].
• Infrastructure connections: Enter the [Subnet Mask], [Default Gateway], [Primary DNS Server] and [Secndry
DNS Server]. If necessary, touch [
Í
]/[
Î
] to scroll up/down.
4 After completing the nece ss ary s etting s , touch [OK]. Then, with the following procedure to review
and s ave the configuration (
A
106).
Saving the Configuration
1 Review the acce ss point’ s configuration and then touch [OK].
• Drag your finger up/down or touch [
Í
]/[
Î
] to scroll and review all the information.
2 Enter a name for the new networ k configuration profile.
[Edit]
>
Enter the desired name using the keyboard screen (
A
105)
>
[OK]
• If you wish, you can give the network configuration profile a more descriptive name to make it easier to
identify.
3 Touch [OK] to s ave the networ k configuration profile.
• If you selected a network configuration profile that contained previous settings, these will be overwritten with
the new configuration you reviewed in step 1.
4 When the confirmation me ss age appear s , touch [OK] and then touch [
X
].
Connecting in Infrastructure Mode
1 S elect [Connection S etting s ].
>
[
B
!
System Setup]
>
[Network Settings]
>
[Connection Settings]
2 S elect the de s ired networ k configuration profile and then s elect [Infra s tructure].
Network configuration profile ([1:] to [4:])
>
[
i
]
>
[Edit]
>
[Infrastructure]
• You can save up to 4 network configuration profiles in the camcorder. If necessary, touch [
Í
]/[
Î
] to scroll
up/down.
3 Touch one of the button s to s elect the de s ired networ k s etup method.
• Continue the setup with the procedure corresponding to the method you wish to use (see the reference
pages below).
[WPS: Button] (
A
107)
[WPS: PIN Code] (
A
107)
[Search for Access Points] (
A
108)
[Manual] (
A
109)
Operating modes: