background image

IMPORTANT SAFETY INSTRUCTIONS

5

In these safety instructions the word “e q u i p m e n t ”
r e fers to the CANON communication camera
VC-C3 and all its accessori e s.

1.

Read Instructions - All the safety and
operating instructions should be read
before the equipment is operated.

2.

Retain Instructions - The safety and
operating instruction should be retained for
future reference.

3.

Heed Warnings - All warnings on the
equipment and in the operating
instructions should be adhered to.

4.

Follow Instructions - All operating and
maintenance instructions should be
followed.

5.

Cleaning - Unplug this equipment from the
wall outlet before cleaning.
Wipe the equipment with a clean soft
cloth.If necessary, put a cloth in diluted
neutral detergent and wring it well before
wiping the equipment with it.Finally, clean
the equipment with a clean dry cloth.Do
not use benzene, thinner or other volatile
liquids or pesticides as they may damage
the product’s finish.When using
chemically-treated cleaning clothes,
observe those precautions accordingly.

6.

Accessories - Do not use accessories not
recommended in this manual as they may
be hazardous. Always use specified
connection cables. Connect devices
correctly.

7.

Water and Moisture - Hazard of electric
shock - Do not use the equipment near
water or in rainy/moist situations. Do not
put a heater near this equipment.

8.

Placing or Moving - Do
not place on an unstable
cart, stand, tripod,
bracket or table. The
equipment may fall,
causing serious injury to

a child or adult, and serious damage to the
equipment.An equipment and cart
combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the equipment and
cart combination to o verturn.

9.

Power Sources - The PA-V12 AC Adapter
should be operated only from the type of
power source indicated on the marking
label. If you are not sure of the type of
power supply to your home, consult your
equipment dealer or local power company.
Regarding other power sources such as
battery power, refer to instructions in this
manual.

10. Polarization - The PA-V12 AC Adapter is

equipped with a polarized 2-prong plug (a
plug having one blade wider than the
other).
The 2-prong polarized plug will fit into the
power outlet only one w ay. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the
polarized plug.

11. Power Cord Protection - Power cords

should be routed so that they are not likely
to be walked on or pinched by items

placed upon or against them. Pay
particular attention to plugs and the point

from which the cords exit the equipment.

12. Outdoor Antenna Grounding - If an outside

antenna is connected to the equipment, be
sure the antenna is grounded so as to
provide some protection against voltage
surges and built-up static charges. Section
810 of the National Electrical Code,
ANSI/NFPA No.70-1984, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of

*VC-C3/E/US/QX3.32  5/29/01  3:26 PM  Page 5

Содержание VC-C3





































Отзывы: