Canon VB101, Руководство пользователя

Страница: 41 / 167

Setup Procedures
3
41
PPP
"Use PPP"
Tick this option to allow PPP connections
using a modem cards.
"Receive and Call"
If Receive only (PPP) is selected, PPP
connection will be established by
incoming call, and if Primarily Call (PPP)
is selected, PPP connection will be
established by outgoing call.
"Country Selector"
When the global modem is used, select
the country where the VB101 will be
used.This setting is ignored if the global
modem is not used.
"Modem max speed"
Select the maximum baud rate as the limit
on the Modem speed. The available settings
are 4800, 9600, 19200, 38400, 57600 and
115,200. Normally, there is no need to
change this setting. Set a low speed when
the line condition is poor.
"PPP Local Address"
Sets the local address. For PPP
connections, this address is set for the
VB101 side.
"PPP Remote Address"
Sets the remote address. For PPP
connections, this address is set for the
Viewer PC or router side.
"PPP Account List"
PPP connection is only permitted to
accounts with combinations of a name
and a password that match those included
in this list. (Passwords are not displayed in
the list.) If you select an account and click
the "Delete" button, the combination of a
account name and a password is removed
from the list. Up to 10 accounts can be
registered on the list.
"Add PPP Account"
Use this to add account and password
combinations to the PPP account list.
Enter the account name and password,
and click the "Add" button. The account
name can be up to 15 characters including
alphanumeric characters, underscores
and hyphens. Passwords can consist of up
to 15 ASCII text characters (space or
printable characters).
The items below are valid when "Use PPP" and
"Primarily Call (PPP)" are selected.
"Dial Method"
Select the type of line to be used when Primarily
Call(PPP) is selected.
"Phone Number"
Set the phone number to be dialed when Primarily
Call(PPP) is selected.
"User Name"
Enter the user name to be used when Primarily Call
(PPP) is selected.
"Password"
Enter the password to be used when Primarily Call
(PPP) is selected.
"Confirm Password"
Re-enter the password you entered above to confirm
the password.
Detail Settings
c
Note
●
If you are using PPP, take care when entering the phone number. Also, when
Primarily Call(PPP) is selected, the VB101 will continue calling to the
specified phone number. Be mindful of phone charges that apply when using
Primarily Call(PPP).
●
If you have selected Primarily Call(PPP), appropriate settings must also be
made on the receiving PC.