7
Installing the Camera
4
LED
LAN cable
For power supply, refer to “Power Supply” (P. 12) .
For network terminal, refer to “Interface” (P. 16)
LED
LED
Status
On
When power supply is on, restarted, or in normal use
(when set to “ON”*)
Blinking
Updating the firmware, or initializing settings
Off
Lights up for a few seconds at startup, then turns off
(when set to “OFF”*)
*
Refer to “Operation Guide”
Important
S32
• The camera head will move and make noise when the power is turned on.
• Do not touch the camera head.
• After the head stops moving, mount the camera.
