13
Connecting the Camera
■
External Device Input Terminal
The external device input terminal consists of an IN terminal and a GND terminal.
Connecting wires to the IN and GND terminals and opening or closing the circuit notifies
the Viewer.
Important
• When connecting sensors and switches, use those that have terminals which are
isolated from internal power and GND.
■
External Device Output Terminals
The external device output terminal consists of an OUT terminal and a GND terminal.
Controls from the viewer can be used to open and close the circuit between the two
terminals. A MOSFET device is used for the output terminal.
Rating range of load connected to the external device output terminals
Rating between
terminals
Maximum voltage 50 V DC
Continuous load current at or below 100 mA
On resistance: Below 1 Ω
Wires suitable for external device cables
Usable wire range
(same for contact input
and output)
Solid wire/Stranded wire AWG: No. 26 – 20
Stripped cable length should be approximately 11 mm
(0.43 in.)
