12
Connecting the Camera
Connecting the Camera
Power Supply
For details, refer to “Other” > “Power Supply” (P. 17) .
For PoE powered devices, check with a Canon's sales representative.
Some PoE devices allow power limits for each port, but applying limits may interfere with
performance. In this case, use without any restrictions.
Some PoE devices have total consumption power limits for ports, which can interfere with
performance when multiple ports are in use. For more information, check the instruction
guide of the PoE device.
External Device I/O Terminals
The External Device I/O Terminal consists of three terminals (IN, OUT, and GND). The GND
terminal serves as both the external device input GND and the external device output GND.
The GND terminal is connected to the camera's interior GND.
When using the external device input and output at the same time, couple the GND wire
from the input cable with the GND wire from the output cable, conforming to the wire
range, and connect it to the GND terminal.
Important
• Do not push the external device I/O terminal button with too much force. Doing
so may cause the button to remain pushed-in.
Internal Connection Diagram
In
ter
nal c
on
tr
oller
IN terminal
GND terminal
GND terminal
OUT terminal
10k
Ω
10k
Ω
0.1
μ
F
1k
Ω
