Canon VB-S30D MKII, Руководство по эксплуатации

Страница: 32 / 185

32
The factory default user name and password are:
User Name: root
Password: camera
The user name “root” is the administrator account for the
camera.
Note
• Only administrators can connect to a camera using the Setting
Page and Admin Tools.
• Authorized users with camera control privileges can also
connect using Admin Viewer. You can set the user privileges of
registered users with [Access Control] > [User Authority] on
the Setting Page (p. 64).
• Depending on the security settings in Internet Explorer, the
blocked content dialog box may appear when attempting to
access the Setting Page, Admin Tools or the Viewers when
using the camera with Internet Explorer 9 or greater, or on
Windows Server 2008/Windows Server 2012. If this happens,
click [Add] to register the camera IP address as a trusted site.
Checking Camera Video
Check the camera video with a viewer. VB Viewer and
Admin Viewer are available.
This section only explains how to launch a viewer for
checking video. For details on how to use each Viewer,
please refer to “Admin Viewer/VB Viewer” (p. 125).
Note
If the blocked content dialog box appears when you launch a
viewer, click [Add] in the dialog box to register the camera’s IP
address as a trusted site.
„
Viewing Video With VB Viewer
VB Viewer allows any user with camera access to use the
camera. The user, however, is restricted to a limited set of
functions.
When you click [VB Viewer] on the top page, the VB
Viewer launches and displays the camera video.
„
Viewing Video With Admin Viewer
The Admin Viewer can only be used by administrators
and registered users with camera control privilege. It
allows complete control of the camera.
The user authentication window appears.
The Admin Viewer launches and displays the camera
video.
Important
• To ensure system security, be sure to change the
administrator password. Do not forget the new password.
• Restore factory default settings if you have forgotten the
administrator password (p. 167). Note that this will reset all
camera settings to factory default settings except for date
and time.
• If you connect to the camera using the administrator account,
it will not be possible to connect with administrator privileges
from a different computer.
• If the administrator and an authorized user share the VB
Viewer on the same computer, it is strongly recommended
that the [Remember my credentials] check box be cleared.
• The Admin Tools and the Admin Viewer cannot be used if an
IPv6 address is specified. Only host names are supported for
IPv6 connections.
1
Click [Admin Viewer] on the top page.
2
Enter a user name and password (p. 31) and click
[OK].