Canon VB-M600D Скачать руководство пользователя страница 131

Страница: 131 / 145

-21

Appen

dix

Since this camera supports various functions, it is recommended that you write down the settings for respective functions. If

you have forgotten the settings and want to set the camera from the beginning, restore the factory default settings first.

*For factory default settings, see P. 8-23.

Restoring the Initial Setting from the
Maintenance Page in the Web Browser

To display the settings menu, you need to enter the IP

address of the camera, user name and administrator

password (P. 4-3).

The maintenance page appears.

A confirmation message appears, asking if you want

to restore the default settings. To restore the default

settings, click [OK].

Administrator password for the camera, maximum

packet size, network settings, date, time, time zone,

SSL certificate, encrypted communications.

Restoring Factory Default Settings with
the Reset Switch on the Camera

If you have forgotten or don't know the IP address of the

camera or your Administrator password, you cannot

operate the camera via the network. In this case, press

the reset switch at the back of the camera.

For dome case removal, see the “VB-M600D/VB-

M600VE Installation Guide.”

There is no on/off switch on the camera. Turn the

camera on and off by plugging in or unplugging LAN

cable (PoE power supply), AC adapter, or external

power plug.

The reset switch is located in a recessed area. Push

the switch using the tip of a slender object such as a

clip.

All settings of the camera, except for the date and

time, are restored to factory default settings.

Restore Settings

Launch the web browser and display the settings
menu.

On the

etting Menu page, click [Maintenance].

Click [Exec] under [Restore

ettings].

Caution

• You must not turn off the camera while it is

performing the [Restore

ettings] operation.

Turning off the camera at this stage may result in
disabling its ability to boot correctly.

• Once [OK] is clicked, you can no longer stop the

process of restoring the default settings.

The camera will be reset to the factory default settings

excluding the following items.

For VB-M600D/VB-M600VE, remove the dome case.

Turn off the camera.

Turn on the power while pushing the reset switch, and
keep pushing the reset switch for 5 seconds or more.

Содержание VB-M600D


















































































































































Результаты поиска

Содержание VB-M600D

Отзывы:

Похожие инструкции для VB-M600D

Бренды по названию

Популярные бренды

Canon VB-M600D, Руководство по эксплуатации

Результаты поиска

Содержание VB-M600D

Отзывы:

Похожие инструкции для VB-M600D

Бренды по названию

Популярные бренды