Canon Vb-C60 - Ptz Network Camera, Руководство по эксплуатации

Страница: 52 / 198

1-36
Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
(7) [Audio Playback at ON Event]
Select the audio playback operation to be performed upon an ON event. If [ Enable ] is
selected, the sound specified under [ Sound Clip ] will be played when the mode changes to
[ Detected ] (ON event).
(8) [Audio Playback at OFF Event]
Select the audio playback operation to be performed upon an OFF event. If [ Enable ] is
selected, the sound specified under [ Sound Clip ] will be played when the mode changes to
[ Detected ] (OFF event).
(9) [Sound Clip]
Select the audio to be played. For registration of sound clips, see "Sound Clip Upload" ( P.
1-39).
(10) [Volume]
Set the sound clip volume as an integer between 1 and 100. The greater the value, the larger
the volume.
(11) [Automatic Tracking at ON Event]
Select the automatic tracking operation. If [ Enable ] is selected, the camera will automatically
start shaking its head upon entering the [ Detected ] mode (ON event).
(12) [Maximum Tracking Time (sec.)]
Set the time during which automatic tracking is continued between 1 and 300 seconds.
Note
z
The motion detection function cannot be interlocked with external device output. However,
interlocking is possible if the optional recording software VK-64/VK-16 is used.
z
For the notes on use of motion detection, see "Notes on Use of Motion Detection, Tracking,
Stream for Recording, Image Stabilizer and Bundled Recording Software VK-Lite". ( Start
Guide )
COP
Y