Canon varioPRINT 6000 TITAN Series Скачать руководство пользователя

Страница: 51 / 69

Canon

varioPRINT 6000 TITAN Series Customer Expectations Document

Revision 4

varioPRINT 6000 TITAN Series Customer Expectations Document

Page 50

8. Installation Review

This chapter describes the necessary number of technicians required to install the

machine properly, the time required to install the main unit and optional equipment,

and customer installation responsibilities.

8.1 Installation Time

The time required to install the varioPRINT 6000 TITAN Series engines depends

on the options and accessories to be installed, and the number of technicians

performing the installation. Customers should discuss the time requirements with

their servicing dealer and schedule the installation accordingly.

The estimated length of time needed to unpack and install the machine and

optional accessories for the minimum and full configurations (multiple PIMs,

PrintGuards, and High Capacity Stackers) is provided below. The estimated

installation time is based on a minimum of one technician with trucker support.

Minimum Configuration:

Approximately 6 hours

Full Configuration:

Approximately 12 hours

If the optional Booklet Maker is configured with the machine, add

approximately 6 hours to the machine’s installation time. If the optional Book

Stacker is configured with the Booklet Maker, add approximately 2.5

hours to the installation time of the Booklet Maker.

The estimated installation and training time for the BGB3202 Perfect Binder is

approximately five (5) days.

The estimated installation time includes a minimum of two (2) experienced

technicians who are trained on the BGB3202 Perfect Binder.

8.2 Customer Responsibilities

Item

Comment

Identify location for equipment.

Area meets installation space and service space

requirements.

Verify strength of floor and level.

Certified by structural engineers.

Ensure that the equipment can be

delivered to the site.

Path is clear and unobstructed.

Confirm proper power and electrical

outlets are available.

Dedicated power, and enough outlets for equipment (including

accessories).

Area meets environmental specifications.

Temperature and humidity are within specifications, venting

provided if necessary.

Network connections available.

If desired.

Содержание varioPRINT 6000 TITAN Series






































































Результаты поиска

Содержание varioPRINT 6000 TITAN Series

Отзывы:

Похожие инструкции для varioPRINT 6000 TITAN Series

Бренды по названию

Популярные бренды

Canon varioPRINT 6000 TITAN Series, Руководство пользователя

Результаты поиска

Содержание varioPRINT 6000 TITAN Series

Отзывы:

Похожие инструкции для varioPRINT 6000 TITAN Series

Бренды по названию

Популярные бренды