Canon varioPRINT 6000 TITAN Series Скачать руководство пользователя

Страница: 5 / 69

Canon

varioPRINT 6000 TITAN Series Customer Expectations Document

Revision 4

varioPRINT 6000 TITAN Series Customer Expectations Document

Page 4

DISCLAIMER

NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER

SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED

SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED

SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS

OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES,

LOSS OR CORRUPTION OF DATA, INCLUDING, WITHOUT LIMITATION, DATA STORED

ON THE PRODUCT’S HARD DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR

INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH

THE CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED

SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ITS SUPPLIERS OR ANY

AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE

PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE

FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS,

DAMAGE OR INJURY TO PERSONS AND THE PROPERTY OF THE PURCHASER OR

OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE

PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR

ANY AUTHORIZED SERVICE PROVIDER.

Canon is a registered trademark of Canon Inc. in the United States and may also be a

registered trademark or trademark in other countries.

varioPRINT and PRISMA are registered trademarks of Canon Production Printing, Netherlands

B.V.

Product and company names used herein are, or may be, the registered trademarks or

trademarks of their respective owners.

Содержание varioPRINT 6000 TITAN Series






































































Результаты поиска

Содержание varioPRINT 6000 TITAN Series

Отзывы:

Похожие инструкции для varioPRINT 6000 TITAN Series

Бренды по названию

Популярные бренды

Canon varioPRINT 6000 TITAN Series, Руководство пользователя

Результаты поиска

Содержание varioPRINT 6000 TITAN Series

Отзывы:

Похожие инструкции для varioPRINT 6000 TITAN Series

Бренды по названию

Популярные бренды