manualshive.com logo in svg

Canon SX50 - REALiS SXGA+ LCOS Projector, Справочник по командам, Страница: 41 / 66

Поделиться
Скачать
Canon SX50 - REALiS SXGA+ LCOS Projector Скачать руководство пользователя страница 41

Commands

6AXR TO Y

Mode

Control Setting

Reference

Function

6-axis adjustment: R to Y hue/color saturation setting

Parameter

Setting values for hue and color saturation (–20 to 20)

Number

<Hue value: Number>

∇

<Color saturation: Number>

The RANGE command can be used to obtain the parameter range that can be set at that time.

Response

An 'i:OK' is returned after setting is successful.

Description

This sets the 6-axis adjustment of the hue and color saturation for R to Y.

(1)

Although this setting is enabled when 6-axis correction (6AX) is selected with the Advanced Color 
Adjustment command (ACADJUST), it can be made independently.

(2)

This command is identical to the 6-axis color adjust function under Advanced color adjustment in 
the Image adj. menu.

(3)

This sets the currently selected input signal and image mode.

(4)

The GET command can be used to retrieve the current color adjustment values.

Example

Setting

> 6AXR=–8, 5

The R hue is set to –8, and the color saturation is set to 5.

< i:OK

Reference

> GET 6AXR or ?6AXR

This retrieves the R hue and color saturation.

<

g:6AXR=12, –8

Obtain settable parameter range (Min, Max)

> RANGE 6AXC
< r:6AXC=N,–20,20

*Commands are indicated by “>”, and responses are indicated by “<”.

Supported Command States

Power supply

Input

Mode

OFF

ON

PM

D-RGB

A-RGB1 A-RGB2

Comp

Video

S-Video

None

Remote

Local

×

○

×

○

○

○

○

○

○

○

○

×

※

If a state is not supported, “INVALID_MODE” or “NOT_POWER_SUPPLIED” is returned with the Err response.

※

When the power supply state is in the process of switching, an “i:BUSY” reply may be sent.

Содержание SX50 - REALiS SXGA+ LCOS Projector



































































Отзывы:

Нет отзывов