Canon ST-E3-RT-V2, Руководство пользователя

Страница: 35 / 72

35
This describes wireless (multiple flash) shooting using manual flash.
You can shoot with a different flash output setting for each receiver unit
(firing group). Set all parameters on the sender unit.
1
Set the flash mode to <
q
>.
2
Set the number of firing groups.

While < M > is displayed, press
function button 2 <
T
> and set
the groups to fire.

The setting changes as follows each
time you press the button:
ALL (
_ )
→
A/B ( % )
→
A/B/C (
]
).
3
Select a firing group.

Press function button 3 < F >,
turn < 9 > and select the group for
which you want to set the flash
output.
4
Set the flash output.

Press function button 3 <
1
>.

Turn <
9
> to set the flash output,
and press the <
8
> button.

Repeat steps 3 and 4 to set the flash
output of all groups.
5
Take the picture.
X
Each group fires at the set flash
output.
q
: Wireless Multiple Flash Shooting with Manual Flash Output

When ALL <
_
> is set, set A, B or C as the firing group for the
receiver units. The flash will not fire if it is set to D or E.

To fire multiple receiver units with the same flash output, select ALL
<
_ > in step 2.