Canon ST-E3-RT-V2, Руководство пользователя

Страница: 14 / 72

14
Turning on the Power
To save battery power, the power will turn off automatically after 5 min.
of idle use. To turn on the transmitter again, press the camera’s shutter
button halfway, or press the test flash button (charge lamp).
By setting the power switch to <
a
>, you can disable flash’s button
and dial operations. Use this to prevent the transmitter function settings
from being accidentally changed after you set them.
If you operate a button or dial, <
LOCKED > is displayed on the LCD
panel (the functions displayed above function buttons 1 to 4, such as
<
=
> and <
@
>, are not displayed).
When a button or dial is operated, the LCD panel illuminates in green
for 12 sec. When setting a function, the illumination continues until the
setting is complete.
If the transmitter is the sender unit in linked shooting, the LCD panel
illuminates in green. If the transmitter is a receiver unit, it illuminates in
orange.
About Auto Power Off
About the Lock Function
About the LCD Panel Illumination

You cannot use the test flash while the camera’s 3 / 1 / 2 timer is
operating.

The transmitter settings are stored even when the power is turned off. To
retain the settings when replacing the batteries, replace the batteries
within 1 min. of turning off the power switch and removing the batteries.

You can fire a test flash even when the power switch is set to the
<
a
> position. Also, when a button or dial is operated, the LCD panel
illuminates.

You can set a beep to sound when the receiver unit is fully charged
(C.Fn-20/p.59).

Auto power off can be disabled (C.Fn-01/p.58).

You can change the duration of the LCD panel illumination (C.Fn-22/p.59).

You can change the color of the LCD panel illumination (P.Fn-03, 04/p.60).