Canon ST-E3-RT-V2, Руководство пользователя

Страница: 24 / 72

24
This section describes basic fully
automatic wireless shooting when using
a transmitter attached to the camera
(sender) and a wirelessly controlled flash
(receiver).
1
Set the flash as the receiver unit.

For the receiver unit settings, see the
flash’s instruction manual.

Set A, B or C as the firing group. The
flash will not fire if it is set to D or E.
2
Check the channel and ID.

If the channels and IDs of the sender
unit and receiver unit are different, set
them to the same numbers (p.21, 22).
3
Position the camera and the
flash.

Position them within the range shown
on page 16.
4
Set the flash mode to <
a
>.

Press the < E > button on the
sender unit and set the flash mode to
<
a >.

The receiver unit is set automatically
to <
a > during shooting via the
control from the sender unit.
a
: Fully Automatic Wireless Flash Shooting
Autoflash Shooting Using One Receiver Unit