![Canon SmartBase MPC190 Скачать руководство пользователя страница 72](http://html.mh-extra.com/html/canon/smartbase-mpc190/smartbase-mpc190_quick-reference-manual_2552966072.webp)
8-16
8-16
8-16
8-16
Troubleshooting
Chapter 8
LCD messages
LCD messages
LCD messages
LCD messages
Message
Message
Message
Message
Cause
Cause
Cause
Cause
Action
Action
Action
Action
Details
Details
Details
Details
BLACK INK CHANGED?
The machine is prompting you
to confirm whether you
replaced the black ink tank.
If you replaced the black ink tank,
press [
O
]. If you did not, press [
P
].
p. 7-5
BLACK INK LOW
The ink level in the black ink
tank is low.
Make sure you have a new black
ink tank ready to replace the used
one when it runs out. If the
machine stops printing when
copying, press [Resume] to
continue printing. However, note
that ink may run out. If print quality
deteriorates or output is blank,
replace the ink tank.
p. 7-1
CANNOT START
The USB cable became
disconnected while printing
from your computer.
Wait for approximately one minute.
If nothing happens, reconnect the
USB cable. Then disconnect and
reconnect the power cord.
CARTRIDGE JAMMED
The printhead holder cannot
move. This is normally due to a
paper jam.
Clear the paper jam or whatever is
obstructing the printhead holder
and then press [Resume]. Do not
attempt to move the printhead
holder manually.
p. 8-13
CHECK PAPER SIZE
The size of the paper in the
multi-purpose tray and that
specified in the paper size
setting are different.
Load the correct paper size or
change the paper size setting.
Then press [Resume].
Set-Up
Sheet
p. 2-3
Содержание SmartBase MPC190
