Canon SmartBase iR1200s, Руководство по обслуживанию, Страница: 77 / 400

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
2-33
CHAPTER 2 USING THE MACHINE
#1 SSW-SW03: echo remedy setting
Bit
0
1
2
3
4
5
6
7
Function
not used
echo product tone in high-speed
transmission
not used
not used
not used
not used
not used
tonal signal before transmission
of CED signal
1
-
transmit
-
-
-
-
-
transmit
0
-
do not transmit
-
-
-
-
-
do not transmit
Factory setting
0
0
0
[Bit 1]
Use it to specify whether or not to transmit an echo protection tone for high-speed trans-
mission V.29 (9600 or 7200 bps; modem signal).
If an error occurs often because of a line condition at time of transmission, set it to ‘1’. If
set to ‘1’, unmodulated carrier will be transmitted as a sync signal before transmission of an
image for about 200 msec.
Memo
The following error codes are associated with a line condition at time of
transmission:
##100, ##104, ##281, ##282, ##283, ##750, ##755, ##760, ##765
[Bit 7]
Use it to specify whether or not to transmit a 1080-Hz total signal before transmission of
the CED signal. Set it to ‘1’ if an error occurs often because of an error at time of reception.
Memo
The following error codes are associated with an echo at time of reception:
##005, ##101, ##106, ##107, ##114, ##200, ##201, ##790