manualshive.com logo in svg

Canon SmartBase iR1200s, Руководство по обслуживанию, Страница: 342 / 400

Поделиться
Скачать
Canon SmartBase iR1200s Скачать руководство пользователя страница 342

COPYRIGHT © 2001 CANON INC. 

2000 2000 2000 2000

 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001

CHAPTER 7 TROUBLESHOOTING

7-60

#021 [RX]

The other party has rejected the machine during polling reception

#022 [TX]

Call fails

The data for an auto-dial number used when selecting a party was deleted.

Register the telephone number of the other party as an auto-dial number, and
transmit once again.

Bit 49 of DIS received from the other party is ‘0’.
1. Transmit to a fax machine equipped with a subaddress function.

2. Use normal G3 transmission.

Cause:
Remedy:

Cause:

Remedy:

When starting a call, a subaddress, or a subaddress and a password, was not speci-

fied.

Specify a subaddress, or a subaddress and a password, when starting a call.

Cause:

Remedy:

#025 [TX/RX] Auto-dial setting is wrong

The settings require registration of a subaddress for auto-dialing; however, a call
was attempted without registering a subaddress.

If auto-dialing is of a type requiring registration of a subaddress, register a

subaddress.

#037 [RX]

Memory has overflowed when receiving images

The image memory overflowed during reception.

Delete image data that is no longer needed, and ask the operator of the other party
to transmit once again.

#059 [TX]

Dialed number and the connected number (CSI) do not match

The user telephone number is not registered correctly on the receiving side.
1. Ask the operator of the receiving side to register the user telephone number cor-

rectly.

2. Use manual transmission; then, after making sure that a connection has been

made, transmit once again.

The exchange malfunctioned, and the machine is not connected to the dialed

party.
Have the exchange checked.

#080 [TX]

The other party is not equipped with an ITU-T-compliant
subaddress reception function

Cause:

Remedy:

Cause:

Remedy:

Cause:

Remedy:

Cause:
Remedy:

Содержание SmartBase iR1200s

















































































































































































































































































































































































































Отзывы:

Нет отзывов