Canon SELPHY CP780, Руководство пользователя

Страница: 18 / 326

Storing the Printed Photos
When both sides of a print have perforations, you can remove the edges by bending them.
Use an oil-based pen to write on prints.
Avoid storing photos in places with high temperatures (40°C/104°F or higher), places with high
humidity or dust, or places subject to direct sunlight.
Avoid actions that may result in color change, color fading or color bleeding, such as the following:
Sticking any type of adhesive tape on a print surface, allowing print surfaces to come into contact
with vinyl or plastic, applying alcohol or other volatile solvents to a print surface, leaving print
surfaces tightly pressed against other surfaces or objects for prolonged periods.
If you wish to mount prints in an album, select an album with photo covers made of nylon,
polypropylene or cellophane.
Color may change over time or depending on storage conditions. Canon assumes no liability for
color changes.





1
After you finish printing, follow the steps below for cleaning and storing SELPHY.
Turn the power off (p. 14) .
Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY.
If the compact power adapter is hot, wait until it has cooled down before you store it.
Remove the memory card and paper cassette and close the paper cassette compartment cover.
Keep the remaining paper inside the cassette and store the paper cassette so that it is protected
from dust and light. Also, do not unpack paper before it is used, and keep it in a dark place.
Keep the color ink cassette inside SELPHY. If you store the color ink cassette outside SELPHY, put
it in a bag so that dust does not stick to the sheet.
Store SELPHY flat so that dust does not enter.






Cleaning Up After Printing
If dust enters SELPHY and sticks to the paper or color ink, print quality deteriorates.