Canon REALiS SX7 Mark II D, Руководство пользователя, Страница: 3 / 146

3
AV Equipment
1.
Install the projector. P32-33
z
Install the projector at the desired distance from the screen.
z
Install batteries in the remote control (P29)
2.
Connect the projector. P64-68
z
Connect the projector and the AV equipment with a cable* (see P38, 39 for the
instruction on connecting a audio cable).
3.
Turn on the projector. P40-41
z
Connect the power cord and turn on the projector.
z
Adjust the height of the projecting image (P43).
z
Select a display language when turning on the projector for the first time (P41).
4.
Press the button twice. P46-47
z
Adjust the focus of the screen.
5.
Set up the AV equipment.
z
Turn on the AV equipment and play the video image.
6.
Select the input signal by pressing the button. P70-72
z
Select DIGITAL VIDEO as the input signal for a digital video image.*
For the other video image, go to step 7.
7.
Press the button twice again. P70
z
Adjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8.
Select the image mode with the button. P55-56
z
Select an appropriate image mode for projection.
z
Specify the aspect ratio or display area in the [Aspect] menu as required (P73,
90, 91).
Turn off the projector P60-61
z
Turn off the projector and unplug the power cord.
* Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video
image (P65).
Finishing the projection...