manualshive.com logo in svg

Canon REALiS SX7 Mark II D, Руководство пользователя, Страница: 28 / 146

Поделиться
Скачать
Canon REALiS SX7 Mark II D Скачать руководство пользователя страница 28

28

BE
FORE USE

Indicators on the Top Control

Top Control

(1) POWER indicator (P40, 60, 111)

Indicates the projector status.
Red:

The projector can be turned on.

Flashing red:

The projector is being turned off (the lamp is being
cooled).

Green:

The projector is on.

Flashing green:

The projector is being turned on.

Blink between red and green: The projector is under the power management

mode.

(2) WARNING lamp (P126)

Flashes red when a problem has been detected on the projector.

(3) LED illumination lamp (P115)

Indicate the projector status with 3 blue LEDs.
Blinking from the left:

The projector is being turning on.

Blinking from the right:

The projector is being turned off.

Middle LED flashing slowly:  The image is blackened out (NO SHOW).
Left and right LEDs flashing slowly:

The image is stopped (FREEZE).

(1)

(2)

(3)

Содержание REALiS SX7 Mark II D



















































































































































Отзывы:

Нет отзывов