Canon PowerShot SX500 IS, Руководство пользователя

Страница: 198 / 228

198
Troubleshooting
Shots look too dark despite the flash firing ( = 55).
• Shoot within flash range ( = 217).
• Adjust brightness by using flash exposure compensation or changing the flash output
level ( = 112).
• Increase the ISO speed ( = 96).
Subjects in flash shots look too bright, highlights are washed-out.
• Shoot within flash range ( = 217).
• Lower the flash and set the flash mode to [ ! ] ( = 27).
• Adjust brightness by using flash exposure compensation or changing the flash output
level ( = 112).
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
• Lower the ISO speed ( = 96).
Subjects are affected by red-eye ( = 69).
• Set [Red-Eye Lamp] to [On] ( = 75) to activate the red-eye reduction lamp
( = 6) in flash shots. For best results, have subjects look at the red-eye reduction
lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
• Edit images using red-eye correction ( = 151).
Recording to the memory card takes too long, or continuous shooting
is slower.
• Use the camera to perform low-level formatting of the memory card ( = 161).
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Menu” ( = 206 – 213).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
• Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length of
movies on the memory card corresponds to the actual recording time ( = 160).
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
• Use the camera to perform low-level formatting of the memory card ( = 161).
• Lower the image quality ( = 70).
• Switch to a memory card that supports high-speed recording ( = 217).
COP
Y