manualshive.com logo in svg

Canon PIXMA MX310 series, Руководство по обслуживанию, Страница: 9 / 25

Поделиться
Скачать
Canon PIXMA MX310 series Скачать руководство пользователя страница 9

the procedure signal has been attempted the number of specified 

times but failed, or T5 time-over (60 sec.) has occurred. 

##769 

TX 

After transmitting PPS-EOP in ECM transmission, re-transmission of 

the procedure signal has been attempted the number of specified 

times but failed. 

##770 

TX 

After transmitting EOR-NULL in ECM transmission, no significant 

signal has been received, and re-transmission of the procedure 

signal has been attempted the number of specified times but failed. 

##772 

TX 

After transmitting EOR-NULL in ECM transmission, DCN has been 

received. 

##773 

TX 

After transmitting EOR-NULL in ECM transmission, re-transmission 

of the procedure signal has been attempted the number of specified 

times but failed, or T5 time-over (60 sec.) has occurred. 

##774 

TX 

After transmitting EOR-NULL in ECM transmission, ERR has been 

received. 

##775 

TX 

After transmitting EOR-MPS in ECM transmission, no significant 

signal has been received, and re-transmission of the procedure 

signal has been attempted the number of specified times but failed. 

##777 

TX 

After transmitting EOR-MPS in ECM transmission, DCN has been 

received. 

##778 

TX 

After transmitting EOR-MPS in ECM transmission, re-transmission of 

the procedure signal has been attempted the number of specified 

times but failed, or T5 time-over (60 sec.) has occurred. 

##779 

TX 

After transmitting EOR-MPS in ECM transmission, ERR has been 

received. 

##780 

TX 

After transmitting EOR-EOM in ECM transmission, no significant 

signal has been received, and re-transmission of the procedure 

signal has been attempted the number of specified times but failed. 

##782 

TX 

After transmitting EOR-EOM in ECM transmission, DCN has been 

received. 

##783 

TX 

After transmitting EOR-EOM in ECM transmission, re-transmission of 

the procedure signal has been attempted the number of specified 

times but failed, or T5 time-over (60 sec.) has occurred. 

##784 

TX 

After transmitting EOR-EOM in ECM transmission, ERR has been 

received. 

##785 

TX 

After transmitting EOR-EOP in ECM transmission, no significant 

signal has been received, and re-transmission of the procedure 

signal has been attempted the number of specified times but failed. 

##787 

TX 

After transmitting EOR-EOP in ECM transmission, DCN has been 

received. 

(9/32) 

Содержание PIXMA MX310 series


























Отзывы:

Нет отзывов