29
Setting Up the Machine and the Computer (Windows)
EN
GLIS
H
9
When the screen shown on the right appears,
remove the USB cable, and click [Next].
The network connection between the machine and
the computer is now successfully established.
To confirm the Setup Results, click [View Setup
Results].
To change the port name, click [Set Port Name] on
the [Setup Results] dialog box. For details, see
“Changing the port name” on page 69
.
10
Place the machine in the location where you will use it, then turn it on.
11
Click [Next] in the [Connection Performance
Measurement] dialog box.
Measuring of the communication performance
starts, and the results are displayed.
12
Confirm the measurement results, then click
[Finish].
Ensure that
is displayed in [Connection
Performance between the Printer and the Access
Point].
Note
If “Unsafe Removal of Device” is displayed, click [OK].
Note
Measuring takes a few minutes. You can cancel
measuring by clicking [Cancel].
You can also execute the same measurements by
using the Canon IJ Network Tool.
Note
z
If any symbol other than
is displayed, refer to
displayed comments and Help for improving the
status of communication link.
z
To check whether the new location is better, click
[Remeasurement] after moving the machine.
Measurement of the communication status is
performed again.
z
When any message on [Overall network
performance] appears in the measurement results,
rearrange the machine and other network devices
following the instructions on the screen.
Note
For customers in the United States
When the online registration dialog box appears, follow the on-screen instructions to register your product.