19
Confirming the Setup Environment
EN
GLIS
H
Confirming the Setup Environment
1
Ensure that the machine and the computer
are turned off.
2
Turn on the computer.
If using over a USB connection, preparation is now complete. See
“Setting Up the Machine
and the Computer (Windows)” on page 23
or
“Setting Up the Machine and the Computer
(Macintosh)” on page 39
.
3
Before setting up on a wireless or wired LAN, confirm the network environment.
Confirm the following before setting up on a wireless LAN:
z
Turn the firewall function off. For details on the firewall function, see
“On Firewalls” on
page 20
.
z
Make sure that configuration of computers and the access point is complete, and check
that computers can connect to the network.
z
Check the access point settings. For details, see
“Confirming Settings of your Access
Point” on page 21
.
Confirm the following before setting up on a wired LAN:
z
Turn the firewall function off. For details on the firewall function, see
“On Firewalls” on
page 20
.
z
Make sure that configuration of computers, hubs, and other network devices is complete,
and check that computers can connect to the network.
4
You now need to set up the machine and your computer.
Windows:
Go to
page 23
Mac
®
OS X:Go to
page 39
Important
Be sure [COPY] stops flashing and all the lamps on
the Operation Panel are off.
Note
z
When using Windows XP or Windows 2000, you must log on as an administrator or have
administrative privileges. Do not switch users during setup.
z
Close any open software applications including anti-virus, computer security and other
software.
Important
After setup is complete, turn back on any security functions you disabled for setup.
If you connect to a network that is not protected with security measures, there is a risk of disclosing data
such as your personal information to a third party.
Note
For details on security functions and configuring network devices like access points, refer to the manuals
provided with those products, or contact their manufacturers.