Canon PIXMA MP510, Руководство по обслуживанию

Страница: 34 / 68

<Ink absorber counter setting procedures>
Set the ink absorber counter data to a replaced new EEPROM after the logic board is replaced in servicing.
1) Before replacement of the logic board ass'y, check the ink absorber counter value in EEPROM information print. See 3-4.
Verification Items, (2) EEPROM information print.
2) In the ink absorber counter setting mode, press the Stop/Reset button the specified number of time(s) according to the ink absorber
whose counter value should be transferred to the replaced new EEPROM.
3) Press the ON/OFF button to proceed to the next step.
4) The ink absorber counter value can be set in 10% increments by pressing the Stop/Reset button. Press the Stop/Reset button the
appropriate number of time(s) to select the value which is closest to the actual counter value (which was checked in step 1) above.
5) Press the ON/OFF button to set the selected value to the EEPROM. Print EEPROM information to confirm that the value is properly
set to the EEPROM.
Time(s) Ink absorber Remarks
0 times Main ink absorber
1 time
Borderless-print ink absorber
2 times Both the main and borderless-print ink absorbers
3 times or more Not valid
Press the ON/OFF button to return to the ink absorber counter setting m
Time(s) Ink absorber counter value to be set (%)
0 times 0%
1 time 10%
2 times
20%
3 times 30%
4 times 40%
5 times 50%
6 times 60%
7 times
70%
8 times 80%
9 times 90%
10 times or more
Not valid.
Press the ON/OFF button to return to the ink absorber counter setting mode.
1-29