Canon PIXMA MP510, Руководство по обслуживанию

Страница: 31 / 68

<The portion replaced in the partial replacement>
- Entire main ink absorber: Indicated by the green lines
- The portion to be replaced in partial replacement: Indicated by the blue lines
(7) Ink absorber counter setting
Before replacement of the logic board ass'y, check the ink absorber counter value. After the logic board ass'y is replaced, set the ink
absorber counter value to the replaced logic board ass'y.
In addition, according to the counter value, replace the ink absorber (ink absorber kit). When the ink absorber is replaced, reset the
applicable ink absorber counter (to "0%").
How to check the ink absorber counter value:
See 3-4. Verification Items, (1) Service test print , or (2) EEPROM information print.
How to set the ink absorber counter:
See 3-3. Adjustment / Settings, (9) Service mode, "Ink absorber counter setting procedures."
(8) User mode
Function Procedures Remarks
Print head manual cleaning - Cleaning both Black and Color:
Perform via the machine operation panel.
- Cleaning Black or Color separately, or both Black
and Color:
Perform from the MP driver Maintenance tab.
Print head deep cleaning Perform via the machine operation panel, or from the
MP driver Maintenance tab.
ASF paper feed roller cleaning Perform via the machine operation panel.
Front feeder paper feed roller
cleaning
Clean the rollers manually.
Nozzle check pattern printing Perform via the machine operation panel, or from the
MP driver Maintenance tab. Set a sheet of plain paper (A4 or Letter) in
the ASF or the front feeder which is
selected on the Paper Feed Switch button.
Manual print head alignment Perform via the machine operation panel, or from the
MP driver Maintenance tab. Set 2 sheets of plain paper (A4 or Letter)
in the ASF or the front feeder which is
selected on the Paper Feed Switch button.
Automatic print head
alignment Perform via the machine operation panel. Print head alignment using the first page
of Print Head Alignment Sheet.
Set a sheet of plain paper (A4 or Letter) in
the ASF or in the front feeder which is
selected by the Paper Feed Switch button.
If the automatic print head alignment is
not effective, perform the manual print
head alignment.
Bottom plate cleaning Perform via the machine operation panel, or from the
MP driver Maintenance tab. Cleaning of the platen ribs when the back
side of paper gets smeared.
Fold a sheet of plain paper (A4 or Letter)
in half crosswise, then unfold and set it in
the ASF with the folded ridge facing
down.
1-26