13
13
Installation procedure > Preparing the Host Machine > Connecting with the Host Machine and Preparing the Paper Deck
Installation procedure > Preparing the Host Machine > Connecting with the Host Machine and Preparing the Paper Deck
■
Connecting with the Host Machine and Preparing the Paper
Deck
1) Remove the 4 screws to remove the bracket from the right side of paper deck.
x4
NOTE:
The two pieces of the removed screws are used later.
2) Install the roller support plate using the 2 screws removed at step 1) after positioning the
roller 3mm high from the floor.
x2
3
㎜
F-1-29
F-1-30
3) Draw the deck mounting cradle, insert the positioning pin to the hole of deck mounting stay
and then fix the deck mounting cradle using the 3 binding screws (M4 x 8).
x3
iR ADVANCE 4045/4051 series
x3
iR ADVANCE C5051 series
F-1-31
F-1-32
F-1-33
