15
15
Installation procedure > Preparing the Host Machine > Connecting with the Host Machine and Preparing the Paper Deck
Installation procedure > Preparing the Host Machine > Connecting with the Host Machine and Preparing the Paper Deck
7) Push in the compartment, and then set the paper deck to the host machine.
8) Loosen the 4 screws retaining the roller support plate in the front side. Then tighten the
4 screws after positioning the roller support plate so that the clearance becomes 3 mm
between the roller and the floor.
3mm
9) Remove the paper deck from the host machine and then draw out the compartment.
F-1-38
F-1-39
10) Fit the deck front cover as if to match it against the coupling of the paper level indicator;
then tighten the screw while referring to the graduation you marked previously.
NOTE:
When attaching the deck front cover, turn the gear of the paper level
indicator fully counterclockwise so that the indicator is "white".
F-1-41
11) Set the paper deck to the host machine.
F-1-40
