Canon OMNERA 400T, Руководство оператора

Страница: 137 / 166

Operator´s Manual
0180-095-418-EN Rev. 6.1 OMNERA®
2020-09-18 Page 129
7 Function and Safety Checks
7.1 Safety checks
7.1.1 General
Note!
Before performing any maintenance please read the safety chapter.
Note!
For exchange of the collimator light field lamp, see the Collimator manual.
If any malfunction is detected, the entire equipment must be taken out of use until the mal-
function is eliminated by a service engineer from the supplier or by the local technical staff
trained by the supplier.
Daily and monthly checks are normally performed by the user/operator.
Annual checks shall be performed either by local technical staff trained by the supplied or au-
thorized service representatives.
The Manufacturer recommends use of the checklist, Appendix B.
7.1.2 Maintenance
To ensure the safety of the patients, the operators, and third parties, and to maintain reliabil-
ity, the equipment must be checked according to Function and Safety Check list. If national
rules or regulations specify more frequent checks and/or maintenance, such regulations
must be observed.
7.1.3 Scheduled checks for the user
Item
Inspection period
Cleaning of parts in contact with the patient Every day
Cleaning of main body of the equipment Every 1 month
Other maintenance and items as follows should only be performed by trained service
personnel.
Item
Checking for abnormal sounds
Checking for fallen foreign matter
Checking for oil leaks, etc
Checking the emergency stop buttons
Function and Safety Checks
Safety checks