Canon NP6218, Руководство по обслуживанию

Страница: 25 / 94

4. After Replacing the Drum Unit
Whenever you have replaced the drum unit, enter the date of replacement and the
current counter reading on the label (Figure 2-26) that came with the drum unit; attach
the label to the front cover of the new drum unit, and perform the image basic adjustment
procedure.
Figure 2-26
5. Attaching the Drum Heater
1) Detach the front cover.
2) Open the copier’s top body by operating the copier open/close lever.
3) Remove the two fixing screws
w
, and detach the harness cover
q
.
Figure 2-27
4) Detach the transfer roller and the static eliminator.
5) Detach the transfer guide.
6) Butt the two heaters against the transfer guide as shown in Figure 2-28, and fix the
two mounts with two screws
e
; further, fix the harness in place using two harness
bands
r
(front, rear).
Figure 2-28
CHAPTER 2 STANDARDS AND ADJUSTMENTS
2-19