Canon NP-2020, Руководство по обслуживанию

Страница: 31 / 207

C. ADD TONER Indicator ( )
The indicator goes when the black developing
assembly running of toner.
1. Black Developing Assembly
1) Open the front door.
Turn the black developing assembly
counterclockwise.
the black developing assembly to the front
until stops.
Open thetoplidofthe blackdeveloping assembly.
Shake the toner cartridge
to about ten
times.
Placethetonercartridgeontheblackdeveloping
assembly.
Hold the toner cartridge, and
the to the
front until a resistance felt.
Figure 1-12
Tap the topofthetonercartridgeso that toner
remaininginthecartridgefalls intothedeveloping
assembly.
Detach the toner cartridge with
10) Closethetoplidoftheblackdevelopingassembly.
11) Slide the black developing assembly into the
copier.
12) Turn the developing assembly
clockwise.
13) the front door.
2. CT Unit (mono color developing unit)
If the image seems too parts of a mono color
the CT likely to be running of mono
colortoner; the if this happens. the CT
placed the protection box and shaken, the
problem may be corrected temporarily.
Note:
The isof add
toner. but use a new
D. CONTROL CARD Indicator
The indicator flashes response to the following
conditions
the control the copier.
1
2
The control not properly into the
control
The control
‘P’
or ‘EE’
when the control properly into
the control
Indìcator
of the foilowing goes if a left
behind, the sorter detached. or the right door
NP2020
NP21 20
left behind.
detached.
Right door open.
1 9 3 2 INC.
J A P A N