background image

111

T

rou
bl

e

?

E

Recording on the Tape

Playback of the Tape

“SET THE TIME ZONE, 
DATE AND TIME” appears on 
the screen.

Set the time zone, date and time.

25

Replace the backup battery with a new lithium button battery 
CR1616. After replacing the backup battery set the time zone, 
date and time again.

22, 

25

The wireless controller will not 
work.

Set [WL.REMOTE] to [ON].

67

The battery of the wireless controller is exhausted. Replace 
the battery.

21

Video noise appears on 
screen.

When using the camcorder in a room where a plasma TV is 
located, keep a distance between the camcorder and the 
plasma TV.

Video noise appears on the 
TV screen.

When using the camcorder in a room where a TV is located, 
keep a distance between the compact power adapter and the 
power or antenna cables of the TV.

Problem

Solution

Image will not appear on the 
screen.

Set the 

 switch to CAMERA.

27

Open the lens cover.

Pressing the start/stop button 
will not start recording.

Set the 

 switch to CAMERA.

27

Load a cassette.

17

Tape reached the end (“

END” flashes on the screen). 

Rewind the tape or replace the cassette.

17

Cassette is protected (“

” flashes on the screen). Change 

the position of the protect switch.

118

Sound is distorted.

When recording near loud sounds (such as fireworks, drums 
or concerts), sound may become distorted.

Sound is recorded in a lower 
level than the actual level.

When recording near loud sounds (such as fireworks, drums 
or concerts), sound may be recorded not in the actual sound 
level.

Problem

Solution

During playback there is 
video noise.

Video heads are dirty. Clean the video heads.

120

Pushing the joystick towards 

/

 does not start 

playback.

Set the 

 switch to PLAY.

37

Load a cassette.

17

Tape reached the end (“

END” flashes on the screen). 

Rewind the tape.

37

Image will not appear on the 
TV screen.

 

Set [AV

DV] to [OFF].

93

Check again that the camcorder is properly connected to the 
TV.

41

Tape is running, but image will 
not appear on the TV screen.

TV/VIDEO selector on the TV is not set to VIDEO. Set the 
selector to VIDEO.

41

Video heads are dirty. Clean the video heads.

120

You attempted to play back or dub copyright protected tape. 
Stop playback/dubbing.

No sound from the built-in 
speaker.

Speaker volume is turned off. Adjust the volume with the 
[SPEAKER VOLUME] option of the FUNC. menu.

40

Problem

Solution

Downloaded From VideoCamera-Manual.com Manuals

Содержание MVX430


































































































































Отзывы: