15
Basic Functions -
Preparations
E
Installing the Backup Battery
The backup battery (lithium button battery CR2025) allows the camcorder to retain
date, time (
18) and other camcorder settings while the power source is
disconnected. Connect a power source to the camcorder when replacing the backup
battery to retain the settings.
1. Open the backup battery cover.
Screw the cover to the left (use, for
example, a coin).
2. Insert the backup battery with the
+ side facing outward.
3. Close the cover.
Align the mark on the cover with the
lower mark on the camcorder and screw
the cover to the right until it clicks.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 100 °C or incinerate the
battery.
• Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony,
Sanyo, or with Duracell2025. Use of other batteries may present a risk of fire or
explosion.
• The used battery should be returned to the supplier for safe disposal.
❍
Do not pick up the battery using tweezers or other metal tools as this will
cause a short circuit.
❍
Wipe the battery with a clean dry cloth to ensure proper contact.
❍
Keep the battery out of reach of children. If it is swallowed, seek medical
assistance immediately. The battery case may break and the battery fluids may
damage stomach and intestines.
❍
Do not disassemble, heat or immerse the battery in water to avoid the risk of
explosion.
The backup battery has a life span of about a year. “
j
” flashes in red to inform
you that it needs to be replaced.
e
w
q
