Canon MultiPASS MP390 Скачать руководство пользователя страница 148

Страница: 148 / 187

146

Troubleshooting

Chapter 13

MEMORY FULL

The machine’s memory is full
because you tried to copy too
many pages at once or a very
detailed document.

Divide the document and copy each
part separately.

—

The image data is too large to
print from your machine.

Print the image data from your
computer.

—

The machine’s memory is full
because it has received too
many documents, or a very
long or detailed document.

Contact the sender and have him/her
divide and resend them.

—

In photo print mode, you tried
to print photographs when the
machine’s memory was full of
received faxes yet to be
deleted, or documents waiting
to be redialed.

Print any documents stored in
memory. Then start again.

page 100

NO ANSWER

The recipient’s fax machine
does not answer.

Check the number. Try dialing
again after waiting for a moment.

—

NO DATA

The fax/telephone number is
not registered in the directory.

page 87

NO FILES ON CARD

There are no available files on
the memory card.

Make sure you have recorded
images in the appropriate format on
the memory card.

page 44

PRESS

BLACKSTART KEY

[Color] is pressed.

Press [Black].

—

PRESS

COLORSTART KEY

[Black] is pressed.

Press [Color].

—

PROBLEM READING

CARD

REINSERT MEMORY

CARD

The data on the memory card
may be inaccessible.

Check the data on the memory card
in your digital camera.

—

PROBLEM READING

CARD

TURN OFF AND ON

There is a problem with the
card slot.

Try switching to another mode or
turning the machine OFF and ON. If
the message remains, contact the
Canon Customer Care Center.

—

PUT IN

CARTRIDGE

There is no print head installed
in the machine.

Install the print head.

Set-Up
Sheet

RECEIVED IN

MEMORY

The machine received the fax
in memory because paper or
ink has run out, or a paper jam
occurred.

Load paper in the multi-purpose
tray.
Replace an ink tank.
Clear the paper jam.

page 27,

page 110,
page 125

Message

Cause

Action

Details

Содержание MultiPASS MP390




























































































































































































Результаты поиска

Содержание MultiPASS MP390

Отзывы:

Canon MultiPASS MP390, Руководство пользователя, Страница: 148 / 187

Результаты поиска

Содержание MultiPASS MP390

Отзывы: