Canon MultiPASS F60, Основное руководство, Страница: 47 / 115

Chapter 7 Faxing from your computer—Basic operation
7-1
7
Faxing fr
om y
our c
omput
er—Basic oper
ation
Faxing from your computer
Basic operation
Fax Model
Chapter
7
Sending faxes from your computer
Before sending faxes from your computer
Before sending faxes from your computer, check the following:
Have you installed the MultiPASS Suite software?
If not, see the Setup Sheet or the Software Guide .
Have you entered the sender information?
Before sending faxes, you must register your name and fax/telephone number so that they
are printed at the top of faxes you send. For more details on what sender information is, see
the
Comprehensive Guide .
You can register this information directly from the operation panel ( p. 8-1), or from the
MultiPASS Suite software. Follow this procedure to set it from the software:
1
Open My MultiPASS ( p. 3-3).
2
On the MultiPASS menu, point to [Device Setup/Speed Dial], then click [MultiPASS F80].
3
On the Send Fax tab, enter your name and fax/telephone number in Fax Information.
• You do not need to enter the date and time. Faxes sent from your computer will include your
computer system’s date and time.
4
Click [OK].
Have you set the correct telephone line type?
Before sending faxes from your computer, make sure you have set the correct telephone line
type for your telephone line.
You can set the telephone line type directly from the operation panel, or from the MultiPASS
Suite software. Follow this procedure to set it from the software:
1
Open My MultiPASS ( p. 3-3).
2
On the MultiPASS menu, point to [Device Setup/Speed Dial], then click
[MultiPASS F80].
3
On the Send Fax tab, select the telephone line type in Phone line.
4
Click [OK].