Canon MultiPASS F30, Руководство пользователя программного обеспечения, Страница: 88 / 170

82 Scanning Chapter 5
2. On the Main tab, if you want to maintain the current width and
height proportions of the image while cropping, click Keep
Proportions.
3. Do one of the following:
• To draw the cropped area:
Click Select. Position the mouse point at the upper left corner of
the area you want to select, and drag the mouse to the lower right
corner of the desired area.
• To define the cropped area by its size:
In the Width and Height boxes, type the appropriate dimensions.
4. To resize the cropped area, do one of the following:
• In the Width and Height boxes, type the appropriate dimensions.
• Drag any sizing handle on the crop border.
5. To reposition the crop border, place the mouse cursor inside the
border and drag to the appropriate area.
6. If you want to clear the current selection, click outside the crop
border.
7. To preview the cropped image, click Preview.
Scaling the Image Output Size 6
You can scale the size of your preview image, to maintain the image size
while enlarging or reducing the output size. For example, if you scale
your image by 50%, the output size of the image is half the size of the
actual image size.
To set an image scale:
On the Main tab, in the Scale box, enter a percentage.
manual.book Page 82 Wednesday, August 22, 2001 3:44 PM