Canon MultiPASS F30 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 170

Canon MultiPASS F30 Скачать руководство пользователя страница 16

10 Installing and Getting Started

Chapter 2

2.

Connect your printer cable to the ports on your printer and PC.

3.

Plug in your printer. Then, turn on the printer and PC.

With your PC on, close any open applications (including any virus
checkers).

If a New Hardware Found, Update Device Driver Wizard, or Add
New Hardware Wizard dialog box appears, click Cancel.

4.

Insert the installation disk into your disk drive.

If you are installing with a copy of the MultiPASS Suite located on
another drive, skip to the next step.

5.

If AutoRun is enabled, the installation starts automatically.

If installation does not start automatically, or you are installing from
the software copied on another drive, do the following:
On the Windows taskbar, click Start, and then click Run. In the Run
dialog box, type the following command and click OK (where D: is
the drive containing the installation disk or copied software):

D:\csplash.exe

6.

When the main menu appears, click Install MultiPASS Suite.

manual.book Page 10 Wednesday, August 22, 2001 3:44 PM

«
...
14
15
16
17
18
...
»

Содержание MultiPASS F30











































































































































































Отзывы:

Нет отзывов