Canon MP 700 Скачать руководство пользователя | Manualshive

Страница: 35 / 150

background image

2-8

MultiPASS MP730/MP700 Chapter 2: Technical Reference

3.2 About the Ink Sensor

onsisting of an LED and photo sensor, the ink sensor uses optical means to detect whether
there is ink in the ink tank.
At the bottom of the ink tank is an indentation that works like a prism.
When there is ink in the ink tank, the refractive index of the ink and the prism's resin
material is about the same. Therefore, the reflected amount of light is small. When the ink is
exhausted, the refractive index of the air and the prism's resin is very different, so all the
light entering the sensor is reflected and the amount of reflected light is high.
The ink sensor detects the difference in the reflected light amount to determine whether or
not there is ink in the tank. The MPU detects the voltage that changes according to the
change in the reflected light amount. The analog value that is input is converted to a digital
value by an internal A/D converter.
When the machine detects no ink in the ink tank, it starts to count the number of ejected dots
corresponding to the amount of ink (about 20% of the ink amount) in the sponge and it starts
to detect the no-ink error.
This error is detected in the following cases: While the power is ON, when the flatbed ass'y
is closed, after the pumping operation, or after the set number of dots have been printed. If
the flatbed ass'y is opened during the ink amount measurement, the external light may
prevent an accurate measurement. The presence of an ink tank will also not be detected. If
there is no ink tank, there will be no reflected light and the machine will therefore assume
that there is ink.

Figure 2-6 Ink Sensor

Correctly Detecting the Absence of Ink
The mechanisms of the product are designed in such a way that the
following operations can at times prevent the correct detection of the
absence of ink, not printing received images and, as a result, generating a
blank output.
• While ink is present, the flatbed ass'y is opened, the ink tank is removed,
and the flatbed ass'y is closed without putting back the ink tank.
• While ink is present, the flatbed ass'y is opened, the ink tank is removed,
and the flatbed ass'y is closed after improperly putting back the ink tank
(i.e., without hearing a clicking sound).
• While ink is present, the flatbed ass'y is opened, and the flatbed ass'y is
closed after fitting an ink tank whose ink chamber is empty.

NOTE

Ink

Inl Present

No Ink

Ink Sensor

Ink Sensor

Refracted

Light

Incident

Light

Reflected
Light

Air

Ink Tank

Prism

Reflected Light
(Completely Reflected)

Incident

Light

Photo
Sensor

LED

«
...
33
34
35
36
37
...
»

Содержание MP 700























































































































































Отзывы:

Нет отзывов

Похожие инструкции для MP 700

Бренд: Oki Страницы: 33

Бренд: Oki Страницы: 52

Бренд: Oki Страницы: 11

Бренд: OKIDATA Страницы: 58

Бренд: Oki Страницы: 282

Бренд: BadgePass Страницы: 2

VarioPrint 6000 MICR series

Бренд: Oce Страницы: 264

Бренд: Oce Страницы: 194

imageRUNNER 5075

Бренд: Canon Страницы: 250

Бренд: POS-TECHNOLOGY Страницы: 40

Бренд: Intermec Страницы: 282

apeosport 550 I

Бренд: Xerox Страницы: 160

imageCLASS LBP247dw

Бренд: Canon Страницы: 32

ActionPrinter 3250 - ActionPrinter-3250 Impact Printer

Бренд: Epson Страницы: 22

ActionPrinter 4000

Бренд: Epson Страницы: 2

ActionPrinter 3260 s

Бренд: Epson Страницы: 116

ActionPrinter 5000 - ActionPrinter-5000 Impact Printer

Бренд: Epson Страницы: 8

ActionPrinter 3250

Бренд: Epson Страницы: 133

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды