Canon Mk1500 Скачать руководство пользователя страница 75

Страница: 75 / 119

Advanced Operations

Part 4

Press

[

▼

] or [

►

If you press [Enter] instead of [

▼

] or [

►

], a new page is created.

Input

“24V”.

Press [Print/Print Option].

The Select media display appears.

•

Press

[

◄

] or [

►

] to select “4:Label”, and then press Label

size [Enter].

The label tape size (width) selection display appears.

•

Press

[

◄

] or [

►

] to select “3:12mm”, and then press Print

[Enter].

The sets to print display appears.

•

Press

[Enter].

Confirm the location of the leading end of the loaded label

tape, press [

◄

] or [

►

] to select the input side, and press

[Enter].

If the leading end of the loaded label tape is at the transport roller 2, select [IN], and if
its at the cutter side, select [OUT].

Canceling printing

If you press [Cancel], the message “Aborting print” appears and printing is aborted.
In this case, label tape that is currently being printed is cut and then ejected.

Printing might not be performed correctly in some orientations, depending on the settings
for the media size and the character size.

Содержание Mk1500
























































































































Результаты поиска

Содержание Mk1500

Отзывы:

Canon Mk1500, Руководство пользователя, Страница: 75 / 119

Результаты поиска

Содержание Mk1500

Отзывы: